-
15-5PH
PH15-5, ASTM-A564, AMS 5659, AMS 5862, is a precipitation-hardenable stainless steel equiped with high strength,high hardness and good corrosion resistance at temperatures up to 600℉（316℃）. It is a variant of the old 17-4 and compared to17-4PH, 15-5 offers better transverse toughness and ductility, better mechanical properties in larger cross-sections, and better forgeability.More +
-
Inconel 625
Inconel 625, AMS 5666, UNS N6625,Chinese GH3625 is a nonmagnetic, corrosion and oxidation-resistant, nickel-based alloy. Its outstanding strength and toughness in the temperature range cryogenic to 2000°F (1093°C) are derived primarily from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix. The alloy has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. Some typical applications for alloy 625 have included heat shields, furnace hardware, gas turbine engine ducting, combustion liners and spray bars, chemical plant hardware, and special seawater applications.More +
-
Control Expansion alloy ASTM F15 Kovar
Our production process for Kovar alloy is first melted using Vacuum Induction Melting (VIM) techniques. A secondary melt operation, Electro Slag Remelt (ESR), is then employed to further remove impurities and improve overall homogeneity.More +
-
Soft magnetic Iron Cobalt alloy ASTM A801 R30005 Co49 V2 Fe49
Co49 V2 Fe49 is a high-saturation magnetic induction strength iron-cobalt-vanadium soft magnetic alloy. In the existing soft magnetic materials, the alloy has the highest saturation magnetic induction (2.4T) and a high Curie point (940℃). Due to the high saturation magnetic induction, when manufacturing a motor of the same power, the volume can be greatly reduced,and the weight can be reduced, which is less than 50% of that of an ordinary motor. Moreover, the motor has high sensitivity, low heat generation,good stability and long life. Due to the high Curie point, the alloy can be operated at higher temperatures where other soft magnetic alloy materials have been completely demagnetized and maintain good magnetic stability. The performance stability of the motor is better than that of the permanent magnet motor at higher operating temperatures.More +
-
Axle-centre Alloy
Shock-Proof & Wear Resistance axle-centre alloy (YB/T5243-1993) Axle-centre alloy Is a kind of elasticity of nickel-based alloy, with high strength, hardness and elasticity, corrosion resistance and non-magnetic characteristics.More +
Forms: Sheet/Plate, Bar/Rod/Wire/Coil
-
Elgiloy Alloy
Elgiloy alloy(Co40CrNiMo),AMS 5833,UNS R30003,Chinese 3J21 This Cobalt-Chromium-Nickel alloy gives a combination of high strength, ductility and good mechanical properties and is age hardenable. Elgiloy also has excellent fatigue life, corrosion resistance in numerous environments and is non-magnetic. It has high corrosion resistance and low relaxation stress at the height of 600 ℉.More +
Forms: Sheet/Plate, Bar/Rod/Wire/Coil
-
Ni-span Alloy
Ni-Span c902,AMS 5225,UNS N09902, (Ni42CrTiAl),Chinese 3J53 A precipitation hardenable Nickel-Iron-Chromium alloy having outstanding controllable thermoelastic coefficient characteristics and excellent oxidation resistance in high temperature atmospheres. The alloy can be processed to have a constant modulus of elasticity at temperatures ranging from -45 to +65 ℃(-50 to +150℉).More +
Forms: Sheet/Plate, Bar/Rod/Wire/Coil
-
Kovar Alloy
Kovar alloy, ASTM F15, Nilo-K,UNS K94610(FeNi29Co17),Chinese 4J29More +
Kovar Alloy, is a controlled expansion alloy. It is a Nickel Iron alloy with 29% Nickel, 17% Cobalt and the remaining balance is Iron.
Forms: Sheet/Plate, Bar/Rod/Wire/Coil,Capillary/Pipe/Tube
-
Hiperco 50A
Hiperco 50A is an alloy of 49% Cobalt,and 2%Vanadium, balance Iron,Hiperco 50A have the highest magnetic saturation of all soft-magnetic alloys and excels in applications where this attribute is needed.More +
Forms: Sheet/Plate, Bar/Rod/Coil
-
HiperCo 27
HiperCo27 alloy is an iron-cobalt-chromium soft magnetic alloy possessing the highest degree of ductility and toughness in the commercially available iron-cobalt grades of high saturation and high Curie temperature soft magnetic alloys. Although the permeability and coercive force of HiperCo 50 alloy are somewhat better than HiperCo 27 alloy, the magnetic saturation of both alloys is nearly identical. In addition, HiperCo 27 alloy does not exhibit the brittleness of HiperCo 50 alloy.More +
Forms: Sheet/Plate, Bar/Rod/Coil
-
Super Invar
Super Invar ,A low expansion alloy consisting of 32% Nickel, 4% Cobalt, and balance Iron. Super Invar Alloy exhibits minimum thermal expansion at room temperatures (one half of Invar Alloy), as well as thermal expansion properties less than that of Invar Alloy in the 67/203°F (-55/95°C) temperature range.More +
Forms: Sheet/Plate, Bar/Rod/Wire/Coil,Capillary/Pipe/Tube
-
Ceramvar Alloy
Ceramvar alloy, ASTM F1466,(Ni27Co25),Chinese 4J33/4J34More +
CERAMVAR ALLOY or we call iron-nickel-cobalt alloys, nominally 27% nickel, 25% cobalt and 48% iron, in the forms of wire, rod, bar, strip, sheet, and tubing, intended primarily for brazed metal-to-ceramic seals with alumina ceramics, for vacuum electronic applications. Unless otherwise indicated.
Forms: Sheet/Plate, Bar/Rod/Wire/Coil,Capillary/Pipe/Tube
-
65-Permalloy
65-Permalloy has a hysteresis loop and high saturation induction intensity. 65-Permalloy working in a secondary magnetic field of magnetic amplifier,chock coil,and computer components,etc.More +
Forms: Sheet/Plate,Wire,Bar/Rod/Coil
-
52 Alloy
Alloy 52,ASTM F30,UNS K95050,(Fe-50Ni),Chinese 4J50More +
Alloy 52 is a 52% nickel-iron alloy developed for glass-to-metal seals for some of the soft glasses and some ceramics. Produced with good machining properties, it’s manufactured in a controlled environment under controlled conditions.
Forms: Sheet/Plate, Bar/Rod/Wire/Coil,Capillary/Pipe/Tube
-
Alloy 27
Alloy 27,ASTM F-256,UNS K92801,(Fe-28Cr),Chinese 4J28 Alloy 27, it’s glass-to-metal sealing and iron-chromium alloy. Nominally 28 % chromium, in strip, bar, wire, and rod forms intended primarily for sealing to glass in electronic applications. UNS K92801 should only be considered for use at service temperatures below 300°C. Forms: Sheet/Plate, Bar/Rod/Wire/Coil,Capillary/Pipe/TubeMore +
-
Permalloy 80/Mumetal
Permalloy 80/Mumetal is a highly magnetic nickel-molybdenum-iron alloy, with roughly 80% nickel and 15% iron and 5% molybdenum content. It's useful as a magnetic core material in electrical and electronic equipment. Permalloy 80 provides high initial and maximum permeabilities with low coercive force, low hysteresis loss, low eddy-current losses, and low magnetostriction which is critical for industrial applications.More +
Forms: Sheet/Plate,Wire,Bar/Rod/Coil
Related search
Hot spot focusing
XAGY provides excellent Kovar Alloy products
- Kovar Alloy, also know as ASTM F-15, NILO K, Per...
- 1Hiperco 50a with High saturation magentic induction
- 2The New Products---CuNiSn Alloy
- 3Welcome KYOCERA customers to our company
- 4GE Company's Representative Visited Our Factory
- 5XAGY provides excellent Kovar Alloy products
- 6The applications of stainless steel
- 7Israel Customer Visit Xi'an Gangyan
- 8How do you ensure the quality of the products?
- 9What products & sevices can XAGY offer?
- 10How do alloys behave?
