-
N6
N6, Pure Nickel 200, Ni200, W.Nr 2.4066, UNS N02200 N6 is a commercially pure(99.6%) wrought nickel. It has good mechanical properties and excellent resistance to many corrosive environments. It also has good magnetic and magnetostrictive properties, high thermal and electrical conductivities, low gas content and low vapor pressure.More +
-
Soft magnetic Iron Cobalt alloy ASTM A801 R30005 Co49 V2 Fe49
Co49 V2 Fe49 is a high-saturation magnetic induction strength iron-cobalt-vanadium soft magnetic alloy. In the existing soft magnetic materials, the alloy has the highest saturation magnetic induction (2.4T) and a high Curie point (940℃). Due to the high saturation magnetic induction, when manufacturing a motor of the same power, the volume can be greatly reduced,and the weight can be reduced, which is less than 50% of that of an ordinary motor. Moreover, the motor has high sensitivity, low heat generation,good stability and long life. Due to the high Curie point, the alloy can be operated at higher temperatures where other soft magnetic alloy materials have been completely demagnetized and maintain good magnetic stability. The performance stability of the motor is better than that of the permanent magnet motor at higher operating temperatures.More +
-
P6-Alloy
P6 alloy is a cobalt-vandium-iron ductile permanent magnet alloy. The material is used in electrical and electronic applications. Magnetic properties are optimized by heat-treating cold rolled material. It has relatively high remanence and low coercive force.More +
Forms: Sheet/Plate, Bar/Rod
-
Elgiloy Alloy
Elgiloy alloy(Co40CrNiMo),AMS 5833,UNS R30003,Chinese 3J21 This Cobalt-Chromium-Nickel alloy gives a combination of high strength, ductility and good mechanical properties and is age hardenable. Elgiloy also has excellent fatigue life, corrosion resistance in numerous environments and is non-magnetic. It has high corrosion resistance and low relaxation stress at the height of 600 ℉.More +
Forms: Sheet/Plate, Bar/Rod/Wire/Coil
-
Ni-span Alloy
Ni-Span c902,AMS 5225,UNS N09902, (Ni42CrTiAl),Chinese 3J53 A precipitation hardenable Nickel-Iron-Chromium alloy having outstanding controllable thermoelastic coefficient characteristics and excellent oxidation resistance in high temperature atmospheres. The alloy can be processed to have a constant modulus of elasticity at temperatures ranging from -45 to +65 ℃(-50 to +150℉).More +
Forms: Sheet/Plate, Bar/Rod/Wire/Coil
-
VicalloyⅡ
Vicalloy Ⅱ is a cobalt-vanadium-Iron ductile permanent magnet alloy. The material is used in electrical and electrical and electronic application.magnetic properties are optimized by heat-treating cold rolled material.VicalloyⅠ has a relatively high remanence and low coercive force.More +
Forms: Bar/Rod/Disk
-
VicalloyⅠ
Vicalloy Ⅰ is a cobalt-vanadium-Iron ductile permanent magnet alloy. The material is used in electrical and electrical and electronic application.magnetic properties are optimized by heat-treating cold rolled material.VicalloyⅠ has a relatively high remanence and low coercive force.More +
Forms: Sheet/Plate, Bar/Rod
-
Kovar Alloy
Kovar alloy, ASTM F15, Nilo-K,UNS K94610(FeNi29Co17),Chinese 4J29More +
Kovar Alloy, is a controlled expansion alloy. It is a Nickel Iron alloy with 29% Nickel, 17% Cobalt and the remaining balance is Iron.
Forms: Sheet/Plate, Bar/Rod/Wire/Coil,Capillary/Pipe/Tube
-
Invar Alloy
Invar alloy,ASTM F1684,UNS k93600(FeNi36),Chinese 4J36More +
A Nickel-Iron, low expansion alloy containing 36% Nickel. It maintains nearly constant dimensions over the range of normal atmospheric temperatures.
Forms: Sheet/Plate, Bar/Rod/Wire/Coil,Capillary/Pipe/Tube
-
Hiperco 50A
Hiperco 50A is an alloy of 49% Cobalt,and 2%Vanadium, balance Iron,Hiperco 50A have the highest magnetic saturation of all soft-magnetic alloys and excels in applications where this attribute is needed.More +
Forms: Sheet/Plate, Bar/Rod/Coil
-
HiperCo 27
HiperCo27 alloy is an iron-cobalt-chromium soft magnetic alloy possessing the highest degree of ductility and toughness in the commercially available iron-cobalt grades of high saturation and high Curie temperature soft magnetic alloys. Although the permeability and coercive force of HiperCo 50 alloy are somewhat better than HiperCo 27 alloy, the magnetic saturation of both alloys is nearly identical. In addition, HiperCo 27 alloy does not exhibit the brittleness of HiperCo 50 alloy.More +
Forms: Sheet/Plate, Bar/Rod/Coil
-
Super Invar
Super Invar ,A low expansion alloy consisting of 32% Nickel, 4% Cobalt, and balance Iron. Super Invar Alloy exhibits minimum thermal expansion at room temperatures (one half of Invar Alloy), as well as thermal expansion properties less than that of Invar Alloy in the 67/203°F (-55/95°C) temperature range.More +
Forms: Sheet/Plate, Bar/Rod/Wire/Coil,Capillary/Pipe/Tube
-
Ceramvar Alloy
Ceramvar alloy, ASTM F1466,(Ni27Co25),Chinese 4J33/4J34More +
CERAMVAR ALLOY or we call iron-nickel-cobalt alloys, nominally 27% nickel, 25% cobalt and 48% iron, in the forms of wire, rod, bar, strip, sheet, and tubing, intended primarily for brazed metal-to-ceramic seals with alumina ceramics, for vacuum electronic applications. Unless otherwise indicated.
Forms: Sheet/Plate, Bar/Rod/Wire/Coil,Capillary/Pipe/Tube
-
Alloy 42
Alloy 42,ASTM F30,UNS k94100,(Fe-42Ni) ,Chinese 4J42 42 Alloy, a low expansion alloy, is very similar to Invar 36 with a slightly different Coefficient of Thermal Expansion. This nickel-iron alloy is ideal forlid, lead frames, stencil/etching, telecommunications and aircraft industry, offering a more affordable alternative to Kovar when a tight seal is not required. Forms: Sheet/Plate, Bar/Rod/Wire/Coil,Capillary/Pipe/TubeMore +
-
12Alfenal
Fe-Al alloys contain 6% to 16% aluminum , the rest elements is the iron. The alloys have high resistivity, lower density and higher hardness of soft magnetic alloy. This family of alloy is suitable for the special environment (such as nuclear radiation, shock, acceleration, etc.), and resistance to corrosion and oxidation resistance are better than those of nickel-iron&soft magnetic alloys, and silicon steel.More +
Forms: Sheet/Plate, Bar/Rod/Wire/Coil
-
Alloy 46
Alloy 46,UNS K94600,(Fe-46Ni),Chinese 4J46More +
Consisting of 46% nickel and iron balance, 46 Alloy is a controlled expansion alloy used mostly in electronic applications, especially for glass and ceramic seals. Alloy 46 is also known as Premier 462, NILO 464, and Glass-Seal 461.
Forms: Sheet/Plate, Bar/Rod/Wire/Coil,Capillary/Pipe/Tube
-
52 Alloy
Alloy 52,ASTM F30,UNS K95050,(Fe-50Ni),Chinese 4J50More +
Alloy 52 is a 52% nickel-iron alloy developed for glass-to-metal seals for some of the soft glasses and some ceramics. Produced with good machining properties, it’s manufactured in a controlled environment under controlled conditions.
Forms: Sheet/Plate, Bar/Rod/Wire/Coil,Capillary/Pipe/Tube
-
Alloy 27
Alloy 27,ASTM F-256,UNS K92801,(Fe-28Cr),Chinese 4J28 Alloy 27, it’s glass-to-metal sealing and iron-chromium alloy. Nominally 28 % chromium, in strip, bar, wire, and rod forms intended primarily for sealing to glass in electronic applications. UNS K92801 should only be considered for use at service temperatures below 300°C. Forms: Sheet/Plate, Bar/Rod/Wire/Coil,Capillary/Pipe/TubeMore +
Related search
Hot spot focusing
XAGY provides excellent Kovar Alloy products
- Kovar Alloy, also know as ASTM F-15, NILO K, Per...
- 1Hiperco 50a with High saturation magentic induction
- 2The New Products---CuNiSn Alloy
- 3Welcome KYOCERA customers to our company
- 4GE Company's Representative Visited Our Factory
- 5XAGY provides excellent Kovar Alloy products
- 6The applications of stainless steel
- 7Israel Customer Visit Xi'an Gangyan
- 8How do you ensure the quality of the products?
- 9What products & sevices can XAGY offer?
- 10How do alloys behave?