Fax:0086-29-33698670
Email:sales@xagy.cn
Location:No. 88 East of Century Avenue, XianYang, Shaanxi, China. P.C. 712046
-
View details
2511-16
The role of molybdeum in alloy steel Molybdenum, even in extremly small amounts, has considerable effect as an alloying element on the physical properties of steels. Molybdenum improves strength,hardenability, and wear resistance. Molybdenum steel...
-
View details
2211-16
Nickel-iron mumetal alloy Mumetal is a nickel–iron soft magnetic alloy with very high permeability suitable for shielding sensitive electronic equipment against static or low-frequency magnetic fields.
-
View details
1811-16
Thermal Advantages of Ceramic-to-Metal Seals Ceramic-to-metal seals not only remain stable at extremely high and low temperatures, but they are able to withstand severe thermal shock and repeated thermal cycling. Ceramic functions as an excellent electric...
-
View details
1411-16
Glass-to-metal seal Glass-to-metal seals are a very important element of the construction of vacuum tubes, electric discharge tubes, incandescent light bulbs, glass encapsulated semiconductor diodes, reed switches, pressure tight ...
-
View details
0111-16
Stainless steel Has good corrosion resistance, especially in some different concentration and temperature of organic acid and inorganic acid, or in oxidizing medium has good corrosion resistance;Also has good mechanical proper...
-
View details
2610-16
Fe-Al soft magnetic alloy Fe-Al alloys contain 6% to 16% aluminum, the rest elements is the iron. The alloys have high resistivity, lower density and higher hardness of soft magnetic alloy. This family of alloy is suitable for the speci...
-
View details
2410-16
Elgiloy Alloy This Cobalt-Chromium-Nickel alloy also known as Elgiloy gives a combination of high strength,ductility, and good mechanical properties and is age hardnable. Phynox also has excellent fatigue life, corrosion res...
-
View details
1810-16
Ceramvar alloy Ceramvar alloy or we call iron-nickel-cobalt alloys, nominally 27% nickel, 25% cobalt and 48% iron, in the forms of wire, rod, bar, strip, sheet, and tubing, intended primarily for brazed metal-to-ceramic seals...
-
View details
1210-16
The forming of precision alloy from liquid metal Casting is the earliest known form of liquid metal processing and is still an important process today. Casting is the introduction of molten metal into a cavity or mold where, upon solidification, it becomes an...
-
View details
1010-16
The difference between hot forming and cold forming If the working temperature is higher than the recrystallization temperature of the material, then the process is called hot forming. Otherwise the process is termed as cold forming.
-
View details
0810-16
Inconel 718 high temperature alloy Inconel718 is containing niobium and molybdenum , which has good comprehensive performance in 253 ~ 700 ℃ temperature range, and the yield strength is in the first place of high temperature alloy below 650℃
-
View details
2809-16
The drawing of wires and rods Wire has been in use for many hundreds of years.It was made then and for many centuries afterward by beating metal into plates which were then cut into strips and rounded by further beating.In modern rolling st...
-
View details
2609-16
The methods of tube-making There two basic ways of making tubes as either wrapping an accurate hole in strip steel or pushing a very strong hole through a steel bar.
-
View details
2309-16
What is the role of annealing? Annealing is the process of softening steel to relieve internal strain. This makes the steel easier to machine.
-
View details
2109-16
Preparation for Kovar alloy sealing All degreased, fabricated Kovar alloy parts should be degassed and annealed in a wet hydrogen atmosphere. Atmosphere is to be made moist by bubbling the hydrogen through water at room temperature. Care must be ...
-
View details
1809-16
Heat treatment of Hiperco50A alloy When selecting a heat treating temperature for the application, two factors should be considered: For best magnetic soft characteristics, select the highest suggested temperature. If the application...
-
View details
1409-16
Low expansion Invar alloy Invar (also know as Invar 36, NILO 36, Pernifer 36, and Invar Steel) is a low expansion alloy consisting of 36% Nickel, balance Iron. Invar Alloy exhibits extremely low expansion around ambient temperatures, ma...
-
View details
0909-16
Iron-cobalt high saturation induction HiperCo27 HiperCo27 alloy has been used in applications requiring a combination of good mechanical toughness,good ductility and high saturation induction. Examples have included motors, generators,pole pieces,relays and ...
-
View details
0809-16
XAGY supplies high quality permalloy 80 XAGY permalloy 80 is a highly magnetic nickel-molybdenum-iron alloy, with roughly 80% nickel and 15% iron and 5% molybdenum content. It's useful as a magnetic core material in electrical and electronic equipmen...
-
View details
0709-16
What zones are Hot-rolling mills generally divided into? Hot-rolling mills are generally divided into the following zones:furnace area(for heat supply prior to deformation),rolling area,and finishing area.Rolling stocks will be homogeneously preheated to defined temp...
